Bonjour,
Nous sommes plusieurs ds notre labo a avoir le meme probleme avec anatomist (3.0.0 30.1 et 3.0.2) sous Linux FC3 et FC4 (deux portables DELL (latitude D600)).
Des que l on clique dans la fenetre d affichage du volume, anatomist se met sur la derniere coupe de celui-ci. Ceci rend impossible le positionement de la croix ou l on veux ds le volume, donc la comparaison de plusiers volumes affiche ds differentes fenetre (obligation d utiliser le mode fusion).
Plusieurs tests ont ete realise.
Remote en ssh depuis une autre machine sur la machine "defectueuse"
-> anatomist fonctionne correctement.
Remote de la machine "defectueuse" vers un anatomist sur disque reseau, ou celui-ci fonctionne a partir d'autres machine du reseau
->anatomist ne fonctionne pas correctement.
Si quelqu un a deja rencontre ce pb et a reussit a le resoudre...
Merci d avance
Pierrick
Pb de fenetre sous Linux
Je crois me souvenir que c'est dû à un problème des drivers 3D (OpenGL)de la carte graphique qui renvoie une valeur aberrante à Anatomist quand on clique dans une fenetre.
Je crois que c"etait avec une carte video ATI et des drivers assez anciens.
English version (as this forum is supposed to be in english) :
Problem : when clicking in an Anatomist window, Anatomist goes straight to the last slice of the MRI. If connected from a distant computer (by ssh) it works correctly.
Answer : problem with the OpenGL driver (ATI ?) that send back to anatomist bad coordinates after a mouse click event.
Je crois que c"etait avec une carte video ATI et des drivers assez anciens.
English version (as this forum is supposed to be in english) :
Problem : when clicking in an Anatomist window, Anatomist goes straight to the last slice of the MRI. If connected from a distant computer (by ssh) it works correctly.
Answer : problem with the OpenGL driver (ATI ?) that send back to anatomist bad coordinates after a mouse click event.
Manik Bhattacharjee
INSERM U836
INSERM U836
Solution for ATI M 9000
Change libGL in anatomist install path with a CPU driven opengl engine like mesa3D.
i.e
cp Mesa-6.5/lib/libGL.so* SHFJ/lib/
after compiling Mesa-6.5 (obtain mesa from: http://www.mesa3d.org/)
i.e
cp Mesa-6.5/lib/libGL.so* SHFJ/lib/
after compiling Mesa-6.5 (obtain mesa from: http://www.mesa3d.org/)
- Yann Cointepas
- Posts: 316
- Joined: Tue Jan 20, 2004 2:56 pm
- Location: Neurospin, Saint Aubin, France
- Contact:
I recently encountered this problem on a laptop with an ATI graphic card and Linux Mandriva 2006. In the Mandriva configuration panel, I changed the properties of the display to change the graphical driver. The selected driver was "Radeon (flgx)" and I choosed "Radeon". I then choosed to disable hardware acceleration. After a X server reboot, a system crash and a system reboot, it worked.